Hobby Master 1/72 Air Power Series (Jet Powered) PHOTOS HOW TO REMOVE THE PIN FROM THE HOLE WHERE YOU INSERT THE NOSE GEAR IN THE HARRIERS |
If you arrived at this page using a
search engine or a link from another
site please click on the home button
once during your visit so my visitor
counter will add your visit.
Thank you.
search engine or a link from another
site please click on the home button
once during your visit so my visitor
counter will add your visit.
Thank you.
| THESE PHOTOS WERE TAKEN USING A MACRO SETTING SO THEY ARE MAGNIFIED. I HAVE REMOVED THIS PIN SEVERAL TIMES SO THERE ARE A FEW SCRATCHES BUT IF I WANT TO SEE THE SCRATCHES ON MY MODEL I NEED TO USE A MAGNIFYING GLASS. |
YOU MIGHT ALSO TRY USING MASKING TAPE WITH
THE STICKY SIDE DOWN. YOU JUST MIGHT BE ABLE
TO PULL THE PIN OUT IF IT ISN'T WEDGED IN TOO
TIGHTLY. ONE PERSON PUT A DROP OF WHITE
GLUE ON THE PLAIN END OF A WOODEN MATCH.
HE LET IT DRY AND THE PIN PULLED OUT. ALL HE
HAD TO DO WAS WIPE CLEAN WITH A LITTLE
WATER AND THERE WAS ABSOLUTELY NO
MARKING. I WILL MENTION THIS TO HOBBY MASTER
AND HOPEFULLY THEY CAN COME UP WITH A
SOLUTION ON FUTURE RELEASES.
THE STICKY SIDE DOWN. YOU JUST MIGHT BE ABLE
TO PULL THE PIN OUT IF IT ISN'T WEDGED IN TOO
TIGHTLY. ONE PERSON PUT A DROP OF WHITE
GLUE ON THE PLAIN END OF A WOODEN MATCH.
HE LET IT DRY AND THE PIN PULLED OUT. ALL HE
HAD TO DO WAS WIPE CLEAN WITH A LITTLE
WATER AND THERE WAS ABSOLUTELY NO
MARKING. I WILL MENTION THIS TO HOBBY MASTER
AND HOPEFULLY THEY CAN COME UP WITH A
SOLUTION ON FUTURE RELEASES.
IF YOU WANT TO REMOVE THE REAR DOOR
FOR THE NOSE GEAR THIS IS WHAT I DID.
FOR THE NOSE GEAR THIS IS WHAT I DID.