Hobby Master 1/72 Air Power Series
HA2204
SB2C-5 Helldiver
Aeronavale Esc. 3F, 3.F_3,
aircraft carrier Arromanches, Indochina, 1954
LIMITED EDITION
Die-cast metal with a minimum of plastic.

Professionally painted.

All markings pad applied for superb results.

Interchangeable canopies.

Crew figures.

Comes with display stand.

Landing gear can be displayed up or down.

Comes with missiles.

Photo-etched dive brakes.

Extremely sought after by collectors.
THESE ARE PRE-PRODUCTION
PICTURES NOT THE FINISHED MODEL
In 1938 the Curtiss SB2C was ordered by the US Government as a replacement for the
SBD Dauntless but with numerous delays didn’t reach the first squadrons until 1942.
Even then the aircraft was plagued by poor workmanship and substandard material
resulting in aerodynamic and structural problems. As each new variant was delivered
these defects were corrected and with the last variant, the SB2C-5, Curtiss had a very
good aircraft. Besides the US and France four other countries bought the Helldiver
SB2C-5, Greece Portugal Thailand and Italy with Italy being the last to retire their
aircraft in 1959.

The SB2C Helldiver was commonly referred to as “The Beast” because of its size and
rather poor handling characteristics. Even with new variants and upgrades the Helldiver
never received the credit and respect it deserved. It flew faster and further than the
Avenger, except for range it beat the SBD in every category. Its cruising speed was only
2 mph slower than the famous Hellcat.


Between 1949 and 1954 France bought 110 SB2C-5 aircraft. Some of these planes
were allotted to Esc 3F stationed onboard the carrier Arromanches. The Helldiver and
pilots soon became well thought of by the French troops on the ground during the
famous battle at Dien Bien Phu in 1954. Sometimes only feet above the ground the
pilots flew countless sorties strafing and bombing the Viet-Minh with a total disregard to
the heavy flak. These would be the last combat missions for the Helldiver but probably
the most effective missions in the aircraft’s history.



      Specifications for the Curtiss SB2C-5 Helldiver

First flight – 18/12/1940

Crew – 2 X Pilot and Radio Operator/Gunner

Special Equipment – 1 X AN/APS-4 radar housed in a pod under the right wing.

Dimensions
Length – 36.7ft   (11.18m)
Wingspan – 49.7ft   (15.16m)
Height – 13.2ft   (4.01m)

Performance
Engine – 1 X Wright R-2600-2- Cyclone / 1900hp   (1,417kW)
Speed – Cruise / 158mph   (254km/h)   (137kts)
Maximum Speed – 295mph   (475km/h)   (256kts)
Rate Of Climb – 1,800ft/min   (548m/min)
Service Ceiling – 29,100ft   (8,869m)
Range – 1,165miles   (1,876km)

Weight
Empty – 1,057lbs   (7535kg)
Maximum Take Off – 16,616lbs   (7,537kg)

Armament
2 X 20mm fixed wing cannon or 4 X 0.50 caliber fixed wing machine guns
2 X 0.30 caliber rear cockpit machine guns or 1 X 0.50 caliber flexible rear cockpit
machine gun
Bomb Load- 1 X torpedo or 1,000 pounds of bombs in the bay or 4 X depth charges
Also capable of carry an additional 1,000 pounds of bombs or 8 X 5inch rockets under
the wings.
If you arrived at this page using a
search engine or a link from another
site please click on the home button
once during your visit so my visitor
counter will add your visit.
Thank you.
HOBBY  MASTER  COLLECTOR